Symbol PDT 7200 Series Product Reference Manual page 103

PDT 7200 Series Product Reference Guide
4. After selecting the area, press Enter. IPL checks for the presence of external
power. If the system is running off battery power, IPL displays the Connect to
Power Screen:
5. Place the terminal in the cradle or connect the external power supply and serial
connection. IPL waits at this screen until external power is supplied. If the terminal
is already running from external power, this screen does not display. While this
screen is displayed, pressing Enter or the Cursor Up/Down keys on the keyboard
returns IPL to the Area Selection screen.
6. After the power and serial connections are made, the following screen displays:
Note: If a cradle is the input source, serial parameters are fixed at 38400
baud, no parity, 8 data bits, and 1 stop bit. These parameters cannot
be changed.
The second and fourth lines of this screen reflect the selections made on the Area Selection
and Baud Rate menus, respectively. This screen continues to display until the first
character of the image to be downloaded is received from the host. While this screen is
displayed, pressing the Enter or Cursor Up/Down keys on the keyboard returns IPL to the
Area Selection screen.
As soon as the first character of data is received, IPL displays the receiving screen:
7-18
Insert in Cradle
Or
Connect Power Supply
Waiting for
data
Multiple
Images
Multiple Images
Pages to Erase
Pages to Receive
Page to Write