Using Drvspace To Extend Storage On Pcmcia Card - Symbol PDT 7200 Series Product Reference Manual

PDT 7200 Series Product Reference Guide
Using DRVSPACE to Extend Storage on PCMCIA
Card
DRVSPACE can be used to extend storage on PCMCIA cards in the same way it is used
to extend storage on a standard PC drive. The process is as follows:
1. Insert an empty, formatted PCMCIA card in the development PC.
2. Type the following:
where D: is the drive letter of the PCMCIA card.
3. DRVSPACE creates an empty compressed volume on the card.
4. Install the card in the PDT 7200 and reboot the terminal.
5. When the terminal finishes booting, mount the card by typing:
where D: is the drive letter associated with the slot and card type being used.
6. If you use Chkdsk to check the amount of space available, there should be
approximately twice as much space available as there is physical memory on the
card.
Refer to your MS-DOS 6.22 user documentation for more information about the
DRVSPACE utility.
10-4
create D: <Enter>
DRVSPACE D: