Pcmcia Cards; Sdk - Symbol PDT 7200 Series Product Reference Manual

PDT 7200 Series Product Reference Guide

PCMCIA Cards

PDT 7200 offers one type II PCMCIA slot for inserting memory or communications
peripherals. This port supports 5 volt and 5/3 volt PC cards.
The PCMCIA slot supports:
• Symbol's Spectrum 24
• Flash memory cards.
PDT 724X Spectrum24 Radio Terminals
The PDT 724X is equipped with a Spectrum24 adapter card (Type II PC card connected to
an internally mounted antenna) that enables the terminal to operate in a Spectrum24
network.
The software required (interface, drivers, and configuration files) is described in the
Spectrum24 NDK Product Reference Guide. For information on configuration file edits to
ensure proper operation of the PDT 724X in a Spectrum24 environment, refer to the
Spectrum24 NDK.

SDK

The Series 7000 Software Development Kit (SDK) contains software and documentation to
assist you in developing applications to run on the PDT 7200.
You will need one or more application development environments (ADEs) from other
vendors to develop applications for the PDT 7200. Some examples are Microsoft and
PenRight! for DOS.
Spectrum24 NDK for DOS
The Network Development Kit (NDK) for Spectrum24 contains the network drivers,
samples, and documentation to assist you in developing network-aware applications to run
on the PDT 724X.
To develop applications for Spectrum24 for the PDT 724X, you must install both the Series
7000 SDK and the Spectrum24 NDK for DOS .
Third-Party Software
Other application development environments are available, such as Zetes MCL
Collection. Contact your Symbol Representative for more information.
1-6
®
RF wireless LAN card with internally mounted antenna
®