Symbol PDT 7200 Series Product Reference Manual page 102

Icon for 16 seconds. Both methods have the same effect, but
selecting "Run System" is faster.
Once the selection is made, IPL proceeds to the Area Selection Menu.
3. Use the up and down cursor keys or the up and down arrows on the touch screen
to select the area to be received. You have the following options on this screen:
Prev. Menu
Single Image
Multiple Images
(default selection)
BIOS
Disks 1 - 4
EXEC
SETUP
IPL
Partition Map
Terminal Configuration: Building and Sending the Hex Image
IPL Ver 1.0
Prev. Menu
Single Image
Multiple Images
BIOS
Disk 1
Disk 2
Disk 3
Disk 4
EXEC
SETUP
IPL
Partition Map
Returns you to the Baud Rate menu to modify the baud rate.
Indicates that a single image is to be received, without specifying the
area to be received.
Indicates that more than one area is to be received contiguously. Note:
TCM must be set up to respond to RTS/CTS handshaking. See
Sending the Hex Image
setting in TCM.
Indicates that a new BIOS is to be received.
Indicates the specific disk volume(s) to be received.
For factory diagnostic use only.
Indicates that a new graphical setup program is to be received.
For service use only.
Indicates that the partition map is to be received.
on page 7-12 for more information on this
7-17