Symbol-Supplied Network Configuration Files - Symbol PDT 7200 Series Product Reference Manual

Terminal Configuration: Editing the Configuration Files
To allow use of an I/O card that requires an IRQ line in a PCMCIA slot, the default
CSALLOC.INI contains the following lines:
IRQEXCLUDE=0-2,5-9,C-E
IRQINCLUDE=A-B,F
This restricts the I/O cards to IRQ lines 10, 11, and 15.
In addition to the IRQ lines discussed above, modem cards may also use IRQ lines 3 and
4 for COM3 and COM4, respectively. To use IRQ lines 3 and 4 for modem cards, modify
the default CSALLOC.INI (below the resource modification line) to read:
IRQEXCLUDE=0-2,5-9,C-E
IRQINCLUDE=3-4,A-B,F
Consult the CardSoft 3.1 User's Guide for more information.
• CARDID.INI
Card identification initialization file (base).
Note: . CLB includes various card library files used in CARDID.INI to allow
automatic recognition and configuration of PCMCIA cards.

Symbol-Supplied Network Configuration Files

See the Spectrum24 NDK for DOS for specific network configuration instructions.
6-13