Creating The Script For The Hex Image; Open A New Or Existing Script - Symbol PDT 7200 Series Product Reference Manual

PDT 7200 Series Product Reference Guide

Creating the Script for the Hex Image

On start-up, TCM displays the screen shown on
Explorer window pointing to the SYMSDK\SCRIPTS directory and the SDK7X00 directory.
The Script1 Window directory pane displays three volumes: Volume1, Volume2, and
Volume3. Depending on the type of flash chip you have, the number of volumes may
change. Files can be added to each of the volumes.
• Create a new script file or open an existing script
• Drag and drop existing files and directories to that script
• Set the script parameters
• Save the script
• Review and modify the script.
Each process is described in the sections that follow.

Open a New or Existing Script

Scripts are created in the Script Window.
To open a new script:
• Choose New from the File Menu, OR
• Click on
To open an existing script (e.g., a standard script provided in the SDK):
• Choose Open from the File Menu and select the script file name, OR
• Click on
• Double click on an existing script in the Script Browser window.
Note: If you open and make changes to an existing script, saving the
changes writes over the existing script. If you wish to use an original
or Symbol-supplied standard script as a base and save the changes
in a new script, use Save As instead of Save after making the
changes.
7-8
from the tool bar.
from the toolbar and select the script file name, OR
page 4, with the Script1 window and File