Symbol PDT 7200 Series Product Reference Manual page 96

On the toolbar, choose
3. Select whether to build the partition table, or one volume.
4. Select ASCII format for your hex image, or Compression, which reduces the size
of most hex images in order to speed downloading. Click OK.
5. TCM performs a check. If the script is has no errors, TCM proceeds with the build.
If the Build Fails
If the build fails, TCM displays a message indicating which file(s) are missing.
If the total amount of flash required by the script exceeds the image size, a TCM error
results and the build fails. To correct this, reduce the number of files in the volume, or make
the disk non-bootable. Refer to
on setting the image size appropriately.
Terminal Configuration: Building and Sending the Hex Image
. The Configure Build window appears.
Defining Script Properties on page 7-6 for more information
7-11