Setup; Connecting To The Mobile Computer - Symbol MC909X User Manual

6 - 20 MC909X User Guide
RJ11 or RJ12 modem cable
•
Functioning telephone jack that supports plug-in modems connected to the local telephone system
•
Setup of Country Codes to use the modem with the appropriate country's telephone network.
•
The following items are required for communication:
MC9090-G Series mobile computer
•
Cable Adapter Module (CAM), Symbol p/n ADP9000-100 (see Cable Adapter Module on page 6-15)
•
Serial Adapter Cable (for communication via cradle), Symbol p/n 25-63856-01
•
Microsoft ActiveSync
•
Setup of host computer and mobile computer.
•

Setup

Connecting to the Mobile Computer

Phone cord
Modem Module Connection - Mobile Computer
Figure 6-21
CAUTION
Using the Correct Telephone Line Type
Use a standard analog phone line, as in most households. In an office, use a line connected to a fax machine
or modem. In a hotel, request a room with a standard phone line or data port. If necessary, check with the local
phone company or administrator to make sure you are using the right type of line before sending data.
Phone port
Line In port
Do not connect the modem's 15-pin connector into a VGA port of a host computer.
CAM
Male 15-pin connector
Phone cord