Symbol PDT 7200 Series Product Reference Manual page 101

PDT 7200 Series Product Reference Guide
The terminal displays the copyright screen for three seconds. During this time, IPL is
verifying the Partition Map and the mandatory and checksummed partitions.
The version number on the top of the screen identifies the version of IPL you are using. The
flash type at the bottom of the screen identifies the size and type of flash chip installed in
the terminal, which you need for your TCM script generation. See
on page 7-6.
Pressing the Enter key while the copyright screen is displayed advances the program to the
Baud Rate Menu.
1. Use the up and down cursor keys, or tap the arrows on the touch screen to scroll
to the appropriate baud rate. IPL supports baud rates from 2400 to 115200 baud.
(default is 115200 baud)
2. Press the Enter key or the Scan key to accept the selected baud rate.
Note: If IPL is selected accidentally, or the IPL session is complete, you
may select "Run System" from this menu to exit IPL an boot the
system. The only other way to exit IPL manually is to hold the Power
7-16
Elan IPLVer. 1.0
Copyright 95-99
Symbol Tech.
Flash Type 0810a
Baud
Rate
Run
System
2400
4800
9600
19200
38400
57600
115200
Defining Script Properties