Symbol-Supplied Utilities - Symbol PDT 7200 Series Product Reference Manual

PDT 7200 Series Product Reference Guide

Symbol-Supplied Utilities

PDTSET.EXE
A utility that allows various system settings to be altered from AUTOEXEC.BAT. This utility
is provided with the source code and an abstract explaining its use in the
DOSSAMP\PDTSET directory.
PDTCHECK.EXE
A utility that allows various system conditions to be tested (e.g., trigger, pen, drive letter
presence, display size, etc.). This utility is provided with the source code and an abstract
explaining its use in the DOSSAMP\PDTCHECK directory.
CardSoft is supplied with the Symbol Series 7000 SDK as a series of drivers which are
loaded in CONFIG.SYS:
ATADRV.EXE
CS.EXE
CSALLOC.EXE
SS365SL.EXE
CARDID.EXE
CSALLOC.INI
This file is used by the CSALLOC.EXE driver to allocate memory, I/O, and interrupt
resources to PCMCIA cards. Much of the upper memory area is used by the BIOS. This
memory must be excluded from use by lines in the CSALLOC.INI file.
The default CSALLOC.INI file contains the following memory settings:
RIO=2F8-2FF,370-377,3E8-3FF,100-1FF
MEMEXCLUDE=C000-CFFF,D000-DFFF,E000-EFFF
Generally, these lines are constant and should never be changed by the user.
The PDT 7200 has IRQ lines dedicated for internal system use, others are available for
PCMCIA I/O cards. IRQ 11 and 15 are available to PCMCIA I/O cards; IRQ 3 and 4,
although allocated for internal communication ports, can be used by PCMCIA modems
when the internal communication ports (COM1 and COM2) are not active.
6-12
DEVICEHIGH=atadrv.exe
DEVICEHIGH=cs.exe
DEVICEHIGH=csalloc.ini
DEVICEHIGH=SS365SL.EXE
DEVICE=cardid.exe