Ipl Error Detection - Symbol PDT 7200 Series Product Reference Manual

PDT 7200 Series Product Reference Guide
If the Multiple Images option was selected on the Area Selection screen, IPL then
immediately returns to the Waiting for Data screen to wait for the next image. If any other
selection was made on the Area Selection screen, then IPL stays at the success screen
until the operator acknowledges the message by pressing Enter (or the trigger, or taps
Enter on the touchscreen). Once the screen has been acknowledged, IPL returns to the
Area Selection screen to wait for a new selection.

IPL Error Detection

While receiving data, IPL performs many checks on the data to ensure that the data is
received correctly. If any error is detected, IPL immediately aborts the download, and
reports the error on an error screen:
This screen is displayed until the operator acknowledges the error by pressing Enter (or
trigger, or Enter on the touch screen). Once the screen has been acknowledged, IPL
returns to the Area Selection screen to wait for a new selection.
The second line of the displays the area that was being processed when the error was
detected. The third line of the screen identifies the cause of the error. The errors that can
be reported, and the probable cause of the error, are as follows:
Error
Erase Error
7-20
Download Failed!
BIOS
Error Message
Table 7-2. IPL Errors
Explanation
Either the flash is faulty, and the terminal needs to be
returned for service, or an attempt was made to erase IPL.
(IPL is write-protected, and cannot be erased or
programmed without special hardware.)