Table of Contents
Advertisement
PDT 3200 Technical Reference Guide
speciÞc client drivers to handle conÞguration; PCMSCD.EXE should not be used
with those cards.
¥ PCMSS.EXE is the socket-services driver. Required for all PC cards, it provides
an interface to the PC card hardware.
ATA Cards
ATA cards are ßash memory cards that utilize the IDE interface. This allows the ßash to
appear as a hard drive. Any ATA PC card should work on the PDT 3200 unit with the ap-
propriate drivers installed. The following ATA cards are approved for use on the PDT
3200:
¥ 2.6MB SunDisk Seagate FlashCard, Model ST72P5
¥ 4MB SanDisk PCMCIA PC CARD ATA
¥ 8MB SanDisk PCMCIA PC CARD ATA
Additional cards may be approved. Contact your Symbol Technologies representative for
information.
Fax/Modem Cards
The PDT 3200 should recognize any generic fax/modem PC card. Fax/modem PC cards
are conÞgured to use COM2, I/O address 2F8h, and IRQ 3. The following fax/modem
cards are approved for use on the PDT 3200:
¥ US Robotics Sportster 28.8 Faxmodem PC card with DataView Connector
¥ Xircom CreditCard Modem 28.8
The PDT 3200 does not support fax/modem cards with
Note:
XJack connectors.
LAN Cards
LAN cards require assignment of an I/O window, a memory window, and an IRQ. If the
LAN card will be conÞgured by the super client driver (PCMSCD.EXE), additional entries
to the PCM.INI Þle will be necessary. Many LAN cards come with their own resource-
management system and do not require the PCMSCD.EXE driver.
Note:
Because of the PDT 3200Õs memory-handling properties,
some LAN cards may not work. Please contact Symbol
Technologies before purchasing a LAN card.
4-6
Advertisement
Table of Contents
