Reinstalling The Usb Driver; Communication Specifications - Panasonic FP0R User Manual

Communication

6.2.3.3 Reinstalling the USB driver

Reinstalling the USB driver
P r o c e d u r e

6.3 Communication specifications

TOOL port
98
The USB driver must be installed again if the installation failed. If "?
CP210x USB to UART Bridge Controller" appears in "Other devices" or
"Unknown device" is indicated, the installation has failed.
Also, reinstall the driver if the USB connection does not work well.
1. Right-click "? CP210X USB to UART Bridge Controller"
2. Select "Delete"
3. Reinstall the USB driver (see p. 95)
Item
Interface
Transmission distance
Baud rate
Communication method
Synchronous method
Communication format
Description
RS232C
15m
2400, 4800, 9600, 19200, 38400, 57600, 115200bit/s
Half-duplex
Start stop synchronous system
Data length: 7 bits/8 bits
Parity: None/Odd/Even
Stop bit: 1 bit/2 bits
End code: CR/CR+LF/None/ETX
Start code: No STX/STX
FP0R User's Manual