Setting Communication Parameters - Panasonic FP0R User Manual

Communication
Modbus references and FP0R addresses
R e f e r e n c e

6.8.1 Setting communication parameters

N o t e
164
Modbus reference
Name
Coil
Input
Holding register C10, C14, C16
C32, T32, F32
Input register
1)
Beginning with 0
2)
Beginning with 1
For details on Modbus settings and communication, please refer to the
F145_WRITE_DATA and F146_READ_DATA commands in the FPWIN Pro
online help.
Make the following settings for the communication port:
communication mode (Modbus RTU)

station number

 baud rate
communication format

For details on setting the communication parameters, see "Setting system
registers in PROG mode" on p. 102.
The station number can be set within a range of 1 to 99.

 With a C-NET adapter, a maximum of 32 stations can be speci-
fied.
Decimal Hexadecimal
address address
1)
000001–001760 0000–06DF
002049–006144 0800–17FF
100001–001760 0000–06DF
400001–412315 0000–301B
40001–432765 0000–7FFC
300001–300128 0000–007F
302001–302256 07D0–08CF
PLC address
2)
Y0–Y109F
R0–R255F
X0–X109F
DT0–DT12314
DT0–DT32764
WL0–WL127
LD0–LD255
FP0R User's Manual