1:1 Communication With Gt Touch Panels - Panasonic FP0R User Manual

Communication

6.5.5.2 1:1 communication with GT touch panels

N o t e
R e f e r e n c e
116
For a 1:1 MEWTOCOL-COM connection between the FP0R and a touch panel
of the GT series, an RS232C cable is needed. Communication is performed
via commands from the touch panel and responses from the PLC.
No program is required for communication. Simply set the mutual commu-
nication settings to operate the PLC via the touch panel.
It is recommended to connect the computer to the TOOL port of the FP0R.
A connection cable (order no. AFC8513D) with a 5-pin mini-DIN connector
and a 9-pin Sub-D connector is available.
MEWTOCOL-COM connection between a touch panel of the GT series and
the FP0R
Q Command message W Response message
A USB cable cannot be used.
Using the TOOL port

Left: GT terminal, right: FP0R
Using the COM port (RS232C)

Left: GT terminal, right: FP0R
Please refer to the "GT Series Technical Manual" for more information.
FP0R User's Manual