Panasonic FP0R User Manual page 84

Installation and wiring
Terminal block
Suitable wire
Wiring method
P r o c e d u r e
84
If the socket in the terminal block closes upon counter-clockwise rota-

tion, the connection is wrong. Disconnect the wire, check the terminal
hole, and then re-connect the wire.
The communication connector manufactured by Phoenix Contact is used.
Item
Number of pins
Manufacturer
Model
Product no.
Size
AWG28–16
Only use shielded twisted pair cables.
It is recommended to ground the shielded part.
When using a pole terminal, please refer to "Wiring the terminal block" on
p. 81.
1. Remove a portion of the wire's insulation
Description
3
Phoenix Contact Co.
MKDS1/3-3.5
1751400
Cross-sectional area [mm
0.08–1.25
2
]
FP0R User's Manual