1:1 Communication With A Computer - Panasonic FP0R User Manual

6.5.5.1 1:1 communication with a computer

FP0R User's Manual
For a 1:1 MEWTOCOL-COM connection between the FP0R and a computer,
an RS232C cable is needed. Communication is performed via commands
from the computer and responses from the PLC.
Q Command message W Response message
1:1 MEWTOCOL-COM connection between a computer and the FP0R
It is recommended to connect the computer to the TOOL port of the FP0R.
A connection cable (order no. AFC8513D) with a 5-pin mini-DIN connector
and a 9-pin Sub-D connector is available. A communication cable with a
9-pin sub-D connector on one end and open wires on the other end
(AIGNCAB232D5) is available for connection to the COM port.
 Using the TOOL port
Left: computer, right: FP0R
Using the COM port (RS232C)

Left: computer, right: FP0R
Communication
115