Panasonic FP0R User Manual page 59

Measures regarding heat discharge
Installation space
FP0R User's Manual
Always install the CPU orientated with the TOOL port facing outward on

the bottom in order to prevent the generation of heat.
Do NOT install the CPU as shown below.
Q Upside-down
W Upside-down
E Input and output connectors face down
R Input and output connectors on top
T Horizontal installation of the unit
Do not install the unit above devices which generate heat such as heat-

ers, transformers or large-scale resistors.
Leave at least 50mm of space between the wiring ducts of the unit and

other devices to allow heat radiation and unit replacement.
Installation and wiring
59