6.5.4.1 FP0 compatibility mode
TOOL port
COM port
N o t e
FP0R User's Manual
Make sure that the PLC type selected in FPWIN Pro is "FP0".
All ports can be used in FP0 compatibility mode. For the USB port, the set-
tings are fixed.
Make the following settings for the communication port:
station number
modem connection (disable/enable)
communication format (sending data length)
baud rate
communication mode
station number
baud rate
communication format
modem connection (disable/enable)
For details on setting the communication parameters, see p. 102.
The end code setting must always be "CR", and the start code setting
must be "No STX".
Communication
113