Mewtocol-Com Master/Slave - Panasonic FP0R User Manual

Communication

6.1.2 MEWTOCOL-COM master/slave

R e f e r e n c e
88
This communication mode uses the proprietary MEWTOCOL-COM protocol
to exchange data between a master and one or more slaves. This is called
1:1 or 1:N communication. A 1:N network is also known as a C-NET.
MEWTOCOL-COM connection between a computer and the FP0R:
MEWTOCOL-COM connection between a computer and the FP0R
1 Command message 2 Response message
There is a master function and a slave function. The side that issues com-
mands is called master. The slave receives the commands, executes the
process and sends back responses. The slave answers automatically to the
commands received from the master, so no program is necessary on the
slave.
For detailed information on the MEWTOCOL-COM communication mode,
see "MEWTOCOL-COM" on p. 105.
FP0R User's Manual