D-Link DES-1228/ME Reference Manual page 95

show utilization
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To display the current CPU utilization:
DES-1228/ME:5#show utilization cpu
Command: show utilization cpu
CPU Utilization :
------------------------------------------------------------------
Five Seconds -
CTRL+C ESC q Quit SPACE n Next Page p Previous Page r Refresh
To display the current DRAM utilization:
DES-1228/ME:5#show utilization dram
Command: show utilization dram
DRAM Utilization :
Total DRAM
Used DRAM
Utilization
CTRL+C ESC q Quit SPACE n Next Page p Previous Page r Refresh
DES-1228/ME Metro Ethernet Managed Switch CLI Reference Guide
Used to display real-time utilization statistics.
show utilization [ cpu | dram | flash | ports {<portlist>}]
This command is used to display the real-time utilization statistics for
the Switch.
cpu – Entering this parameter will display the current CPU utilization
of the Switch.
dram – Entering this parameter will display the current DRAM
utilization of the Switch.
flash – Entering this parameter will display the current Flash
utilization of the Switch.
ports – Entering this parameter will display the current port utilization
of the Switch.
<portlist> – Specifies a range of ports to be displayed.
None.
3% One Minute - 2%
: 131,072 KB
: 65,604 KB
: 50%
Five Minutes - 5%
91