D-Link DES-1228/ME Reference Manual page 355

show loopdetect
Purpose Used to display the Switch's current loopback detection configuration.
Syntax show loopdetect
Description This command is used to display the Switch's current loopback detection configuration.
Parameters None.
Restrictions
None.
Example usage:
To display the current loopback detection configuration on the Switch:
DES-1228/ME:5#show loopdetect
Command: show loopdetect
LBD Global Settings
---------------------------
LBD Status
LBD Interval
LBD Recover Time
LBD Trap Status
DES-1228/ME:5#
DES-1228/ME Metro Ethernet Managed Switch CLI Reference Guide
: Disabled
: 10
: 60
: None
351