D-Link DES-1228/ME Reference Manual page 122

show stp ports
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To show STP ports information for port 1 (STP enabled on Switch):
DES-1228/ME:5#show stp ports
Command: show stp ports
MSTP Port Information
----------------------
Port Index
Restricted role
External PathCost : Auto/200000
Port Forward BPDU : Enabled
MSTI Designated Bridge
----- ------------------
0 N/A
CTRL+C ESC q Quit SPACE n Next Page p Previous Page r Refresh
DES-1228/ME Metro Ethernet Managed Switch CLI Reference Guide
Used to display the Switch's current STP ports configuration.
show stp ports {<portlist>} {instance <value 0-8>}
This command is used to display the STP port settings for a specified port or
group of ports.
<portlist> − Specifies a port or range of ports to be viewed. Information for a
single port is displayed. If no ports are specified the STP information for port 1 will
be displayed. Users may use the Space bar, p and n keys to view information for
the remaining ports.
instance <value 0-8> − Enter a value between 0 and 8 corresponding to the
previously configured instance_id of which the user wishes to show the specified
ports' setting. An instance id of 0 denotes the default instance_id (CIST) internally
set on the Switch.
None.
: 1 , Hello Time: 2 /2 , Port STP Enabled
: False, Restricted TCN : False
, Edge Port : Auto /No , P2P : Auto /Yes
Internal PathCost
-----------------
200000
Prio Status
---- ----------
128 Disabled
118
,
Role
----------
Disabled