D-Link DES-1228/ME Reference Manual page 383

config filter dhcp_server trap / log
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To enable the DHCP server screening trap function.
DES-1228/ME:5#config filter dhcp_server trap enable
Command: config filter dhcp_server trap enable
Success.
DES-1228/ME:5#
config filter dhcp_server illegal_server_log_suppress_duration
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To configure a suppress duration of illegal DHCP server feature of 5 minutes:
DES-1228/ME:5# config filter dhcp_server
illegal_server_log_suppress_duration 5min
Command: config filter dhcp_server illegal_server_log_suppress_duration 5min
Success.
DES-1228/ME:5#
DES-1228/ME Metro Ethernet Managed Switch CLI Reference Guide
Used to enable or disable the trap and log functions for DHCP server screening.
config filter dhcp_server [ trap | log ] [ enable | disable ]
This command will enable or disable traps and logs for DHCP server screening.
trap – Specify to enable or disable traps for DHCP server screening.
log - Specify to enable or disable logging for DHCP server screening.
enable – Enable the log or trap function.
disable – Disable the log or trap function.
Only Administrator level, Operator level or Power User level users can issue this
command.
Used to configure the suppress duration of illegal DHCP server feature.
config filter dhcp_server illegal_server_log_suppress_duration [ 1min | 5min | 30min ]
Configure the time period to continue to suppress log entries listing illegal DHCP servers
for the filter DHCP server screening function. The command is effective immediately and
lasts for the period configured.
1min – Configure suppress time of 1 minute.
5min – Configure suppress time of 5 minutes.
30min - Configure suppress time of 30 minutes.
Only Administrator level, Operator level or Power User level users can issue this
command.
379