D-Link DES-1228/ME Reference Manual page 240

Example usage:
To configure SNTP settings:
DES-1228/ME:5#config sntp primary 10.1.1.1 secondary 10.1.1.2 poll-interval
30
Command: config sntp primary 10.1.1.1 secondary 10.1.1.2 poll-interval 30
Success.
DES-1228/ME:5#
show sntp
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To display SNTP configuration information:
DES-1228/ME:5#show sntp
Command: show sntp
Current Time Source
SNTP
SNTP Primary Server
SNTP Secondary Server
SNTP Poll Interval
DES-1228/ME:5#
enable sntp
Purpose
Syntax
Description
Parameters
Restrictions
DES-1228/ME Metro Ethernet Managed Switch CLI Reference Guide
Used to display the SNTP information.
show sntp
This command is used to display SNTP settings information
including the source IP address, time and poll interval.
None.
None.
: System Clock
: Disabled
: 10.1.1.1
: 10.1.1.2
: 30 sec
To enable SNTP server support.
enable sntp
This command is used to enable SNTP support. SNTP service must
be separately configured (see config sntp). Enabling and configuring
SNTP support will override any manually configured system time
settings.
None.
Only Administrator level, Operator level or Power User level users
can issue this command. SNTP settings must be configured for
SNTP to function (config sntp).
236