D-Link DES-1228/ME Reference Manual page 63

Example usage:
To create an SNMP group named "sg1:"
DES-1228/ME:5#create snmp group dlink v3 noauth_nopriv read_view dlinkview
write_view dlinkview notify_view dlinkview
Command:
write_view dlinkview notify_view dlinkview
Success.
DES-1228/ME:5#
delete snmp group
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To delete the SNMP group named "dlink".
DES-1228/ME:5#delete snmp group dlink
Command: delete snmp group dlink
Success.
DES-1228/ME:5#
show snmp groups
Purpose
Syntax
Description
Parameters
Restrictions
DES-1228/ME Metro Ethernet Managed Switch CLI Reference Guide
create snmp group
Used to remove an SNMP group from the Switch.
delete snmp group <groupname 32>
This command is used to remove an SNMP group from the Switch.
<groupname 32> − An alphanumeric name of up to 32 characters that
will identify the SNMP group the new SNMP user will be associated
with.
Only Administrator level, Operator level or Power User level users
can issue this command.
Used to display the group names of SNMP groups currently configured
on the Switch. The security model, level, and status of each group are
also displayed.
show snmp groups
This command is used to display the group names of SNMP groups
currently configured on the Switch. The security model, level, and
status of each group are also displayed.
None.
None.
dlink v3 noauth_nopriv
59
read_view dlinkview