D-Link DES-1228/ME Reference Manual page 17

create account
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To create an operator-level user account with the username "dlink".
D E S- 1 2 2 8 /M E : 5 # cr e a t e a cc o u n t o p e r a to r d l i n k
C o mm a n d : c r e a t e a c c o u n t o p e r at o r d li n k
E n te r a ca s e - s en s i t i v e n e w p as s w o r d: * * * * *
E n te r t h e n e w pa s s w o r d a g a i n f o r c on f i r m a t io n : * * ** *
S u cc e s s .
DES-1228/ME:5#
DES-1228/ME Metro Ethernet Managed Switch CLI Reference Guide
Used to create user accounts.
create [admin|operator|Power User|user] <username 15>
This command is used to create user accounts that consist of a
username of 1 to 15 characters and a password of 0 to 15
characters. Up to eight user accounts can be created.
admin <username> – Name of the administrator account.
operator <username>- Specify an operator level account.
Power User <username> - Specify a power user level account, The
power user level is lower than the operator level and higher than the
user level.
user <username> – Name of the user account.
username - The user name, with a minimum of 1 character and a
maximum of 15 characters
Only Administrator level users can issue this command.
Usernames can be between 1 and 15 characters.
Passwords can be between 0 and 15 characters.
NOTICE: In the case of lost passwords or password corruption, please refer to
Appendix C Password Recovery Procedure, at the end of this manual which will
guide you through the steps necessary to resolve this issue.
13