D-Link DES-1228/ME Reference Manual page 150

config dscp_mapping
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To configure DSCP map to traffic class:
DES-1228/ME:5#config dscp_mapping dscp_value 8 class 1
Command: config dscp_mapping dscp_value 8 class 1
Success.
DES-1228/ME:5#
DES-1228/ME Metro Ethernet Managed Switch CLI Reference Guide
Used to map the DSCP value in the IP header of incoming packet
to one of the four hardware queues available on the Switch.
config dscp_mapping dscp_value <value 0-63> [class <class_id 0-
3>]
This command is used to configure DSCP mapping to traffic class.
<value 0-63> − The DSCP value of the incoming packet you want
to associate with the class ID.
<class_id 0-3> − The number of the Switch's hardware priority
queue. The Switch has four hardware priority queues available.
They are numbered between 0 (the lowest priority) and 3 (the
highest priority).
Only Administrator level, Operator level or Power User level users
can issue this command.
146