D-Link DES-1228/ME Reference Manual page 276

Example usage:
To add an authentication host to server group "group_1":
DES-1228/ME:5#
10.1.1.121 protocol tacacs+
Command: config authen server_group group_1 add server_host 10.1.1.121
protocol tacacs+
Success.
DES-1228/ME:5#
delete authen server_group
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To delete the server group "group_1":
DES-1228/ME:5#delete authen server_group group_1
Command: delete authen server_group group_1
Success.
DES-1228/ME:5#
show authen server_group
Purpose
Syntax
Description
Parameters
Restrictions
DES-1228/ME Metro Ethernet Managed Switch CLI Reference Guide
config authen
Used to delete a user-defined authentication server group.
delete authen server_group <string 15>
This command is used to delete an authentication server group.
<string 15> − Enter an alphanumeric string of up to 15 characters to
define the previously created server group to be deleted.
Only Administrator level users can issue this command.
Used to view authentication server groups on the Switch.
show authen server_group <string 15>
This command is used to display authentication server groups
currently configured on the Switch.
This command will display the following fields:
Group Name − The name of the server group currently configured on
the Switch, including built in groups and user defined groups.
IP Address − The IP address of the server host.
Protocol − The authentication protocol used by the server host.
<string 15> − Enter an alphanumeric string of up to 15 characters to
define the previously created server group to be viewed.
Entering this command without the <string> parameter will display all
authentication server groups on the Switch.
None.
server_group group_1
272
add server_host