D-Link DES-1228/ME Reference Manual page 111

enable stp
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To enable STP, globally, on the Switch:
DES-1228/ME:5#enable stp
Command: enable stp
Success.
DES-1228/ME:5#
disable stp
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To disable STP on the Switch:
DES-1228/ME:5#disable stp
Command: disable stp
Success.
DES-1228/ME:5#
DES-1228/ME Metro Ethernet Managed Switch CLI Reference Guide
Used to globally enable STP on the Switch.
enable stp
This command is used to globally enable the Spanning Tree Protocol on the Switch.
None.
Only Administrator level, Operator level or Power User level users can issue this
command.
Used to globally disable STP on the Switch.
disable stp
This command is used to globally disable the Spanning Tree Protocol on the Switch.
None.
Only Administrator level, Operator level or Power User level users can issue this
command.
107