D-Link DES-1228/ME Reference Manual page 290

Command
enable smtp
disable smtp
config smtp
show smtp
smtp send_testmsg
Each command is listed, in detail, in the following sections:
enable smtp
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To enable SMTP on the Switch:
DES-1228/ME:5#enable smtp
Command: enable smtp
Success.
DES-1228/ME:5#
disable smtp
Purpose
Syntax
Description
Parameters
Restrictions
DES-1228/ME Metro Ethernet Managed Switch CLI Reference Guide
Parameters
{server <ipaddr> | server_port <tcp_port_number 1-65535> |
self_mail_addr <mail_addr 64> | [add mail_receiver <mail_addr
64> | delete mail_receiver <index 1-8>]} (1)
Used to enable the Switch as a SMTP client.
enable smtp
This command, in conjunction with the disable smtp command
will enable and disable the Switch as a SMTP client without
changing configurations.
None.
Only Administrator level, Operator level or Power User level
users can issue this command.
Used to disable the Switch as a SMTP client.
disable smtp
This command, in conjunction with the enable smtp command
will enable and disable the Switch as a SMTP client without
changing configurations.
None.
Only Administrator level, Operator level or Power User level
users can issue this command.
286