D-Link DES-1228/ME Reference Manual page 266

config authen_enable
Restrictions
Example usage:
To configure the user defined method list "Permit" with authentication methods TACACS, XTACACS and local, in that order:
DES-1228/ME:5#config
xtacacs local_enable
Command: config authen_enable method_list_name Zira method tacacs xtacacs
local_enable
Success.
DES-1228/ME:5#
To configure the default method list with authentication methods XTACACS, TACACS+ and local, in that order:
DES-1228/ME:5#config
local_enable
Command: config authen_enable default method xtacacs tacacs+ local_enable
Success.
DES-1228/ME:5#
delete authen_enable method_list_name
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To delete the user-defined method list "Permit"
DES-1228/ME:5#delete authen_enable method_list_name Permit
Command: delete authen_enable method_list_name Permit
Success.
DES-1228/ME:5#
DES-1228/ME Metro Ethernet Managed Switch CLI Reference Guide
authenticated using the local user account database on the Switch.
The local enable password of the device can be configured using the
"config admin local_password" command.
none – Adding this parameter will require no authentication to
access the administration level privileges on the Switch.
Only Administrator level users can issue this command.
authen_enable
authen_enable
Used to delete a user-defined method list of authentication methods
for promoting normal user level privileges to Administrator level
privileges on the Switch.
delete authen_enable method_list_name <string 15>
This command is used to delete a user-defined method list of
authentication methods for promoting user level privileges to
Administrator level privileges.
<string 15> − Enter an alphanumeric string of up to 15 characters to
define the given enable method list to delete.
Only Administrator level users can issue this command.
method_list_name Zira
default method
262
method tacacs
xtacacs tacacs+