D-Link DES-1228/ME Reference Manual page 341

show dos_prevention
Purpose
Syntax
Description
Parameters
Restrictions
Example usage
To display DoS prevention information:
DES-1228/ME:5# show dos_prevention
Command: show dos_prevention
Trap/Log
DoS Type
Land Attack
Blat Attack
Smurf Attack
TCP Null Scan
TCP Xmascan
TCP SYNFIN
TCP SYN SrcPort Less Than 1024
DES-1228/ME:5#
DES-1228/ME Metro Ethernet Managed Switch CLI Reference Guide
Used to display DoS prevention information.
show dos_prevention { land_attack | blat_attack | smurf_attack |
tcp_null_scan | tcp_xmascan | tcp_synfin | tcp_syn_srcport_less_1024 }
This command is used to display DoS prevention information, including
the type of DoS attack, the prevention state, the corresponding action if
the prevention is enabled, and the counter information of the DoS packet.
The type of DoS attack. Possible values are as follows:
land_attack
blat_attack
smurf_attack
tcp_null_scan
tcp_xmascan
tcp_synfin
tcp_syn_srcport_less_1024
None.
: Enabled
State Action
Disabled Drop
Enabled Drop
Enabled Mirror
Enabled Drop
Disabled Drop
Enabled Mirror
Enabled Mirror
337
Frame Counts
0
123
1500
100000
0
1245678
1234567890