D-Link DES-1228/ME Reference Manual page 349

delete address_binding
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To delete an IP-MAC binding entry on the Switch:
DES-1228/ME:5#delete
mac_address 00-00-00-00-00-06
Command: delete address-binding ip-mac ipaddress 10.1.1.1 mac_address 00-
00-00-00-00-06
Success.
DES-1228/ME:5#
DES-1228/ME Metro Ethernet Managed Switch CLI Reference Guide
Used to delete IP-MAC-port binding entries.
delete address_binding [ip_mac [ipaddress <ipaddr> {mac_address
<macaddr>} | all] | blocked [all | vlan_name <vlan_name>
mac_address <macaddr>]]
This command is used to delete IP-MAC-port binding entries. Two
different kinds of information can be deleted.
ip_mac – Individual address binding entries can be deleted by
entering the physical and IP addresses of the device. Toggling to all
will delete all the address binding entries.
blocked – Blocked address binding entries (bindings between VLAN
names and MAC addresses) can be deleted by entering the VLAN
name and the physical address of the device. To delete all the
blocked address binding entries, toggle all.
<ipaddr> The IP address of the device where the IP-MAC-port
binding is made.
<macaddr> The MAC address of the device where the IP-MAC-port
binding is made.
<vlan_name> The VLAN name of the VLAN that is bound to a MAC
address in order to block a specific device on a known VLAN.
all – For IP-MAC-port binding all specifies all the IP-MAC-port binding
entries; for blocked address binding entries all specifies all the
blocked VLANs and their bound physical addresses.
Only Administrator level, Operator level or Power User level users
can issue this command.
address-binding ip-mac ipaddress
345
10.1.1.1