D-Link DES-1228/ME Reference Manual page 375

enable bpdu_protection
Purpose
Syntax
Description
Parameters
Restrictions
Example usage
To enable BPDU attack protection on the entire Switch:
DES-1228/ME:5# enable bpdu_protection
Commands: enable bpdu_protection
Success.
DES-1228/ME:5#
DES-1228/ME Metro Ethernet Managed Switch CLI Reference Guide
Used to globally enable BPDU attack protection on the Switch.
enable bpdu_protection
Use this to enable BPDU attack protection.
NOTE: The BPDU Attack Protection function and Spanning Tree Protocol
for ports are mutually exclusive. When the STP function is enabled on a
particular port, BPDU Attack Protection cannot be enabled.
None.
Only Administrator level, Operator level or Power User level users can issue this
command.
371