D-Link DES-1228/ME Reference Manual page 207

Example usage:
To configure the RADIUS settings:
DES-1228/ME:5#config radius 1 10.48.74.121 key dlink default
Command: config radius 1 10.48.74.121 key dlink default
Success.
DES-1228/ME:5#
config radius parameter
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To configure the timeout option for RADIUS servers:
DES-1228/ME:5# config radius parameter timeout 3
Command: config radius parameter timeout 3
Success.
DES-1228/ME:5#
show radius
Purpose
Syntax
Description
Parameters
Restrictions
DES-1228/ME Metro Ethernet Managed Switch CLI Reference Guide
Used to configure parameters for RADIUS servers.
config radius parameter {timeout <int 1-255> | retransmit <int 1-
255>} (1)
This command is used to configure parameters for RADIUS servers.
timeout <int 1-255> − The time in second for waiting server reply.
The default value is 5 seconds.
retransmit <int 1-255> − The count for re-transmit. The default value
is 2.
Only Administrator level, Operator level or Power User level users
can issue this command.
Used to display the current RADIUS configurations on the Switch.
show radius
This command is used to display the current RADIUS configurations
on the Switch.
None.
None.
203