Related Manuals for D-Link DES-1210G
Summary of Contents for D-Link DES-1210G
- Page 1 DES-1210G 10/100/1000 Mbps Stand-alone Switch User’s Guide First Edition (June, 2000) 651S1210G015 Printed In Taiwan RECYCLABLE...
-
Page 2: Limited Warranty
The one-year period of warranty on complete products applies on condition that the product's Registration Card is filled out and returned to a D-Link office within ninety (90) days of purchase. A list of D-Link offices is provided at the back of this manual, together with a copy of the Registration Card. -
Page 3: Limitation Of Liability
D-Link Offices for Registration and Warranty Service The product's Registration Card, provided at the back of this manual, must be sent to a D-Link office. To obtain an RMA number for warranty service as to a hardware product, or to obtain warranty service as to a software product, contact the D-Link office nearest you. -
Page 4: Fcc Warning
FCC Warning This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. -
Page 5: Table Of Contents
DES-1210G Fast Ethernet/Gigabit Ethernet Switch User’s Guide Table of Contents ABOUT THIS GUIDE ........................... 7 ..............................7 ONVENTIONS ’ ........................7 VERVIEW OF THIS UIDE INTRODUCTION ............................1 ..........................1 THERNET ECHNOLOGY ........................1 IGABIT THERNET ECHNOLOGY ............................ 2 WITCHING... -
Page 6: Conventions
DES-1210G Fast Ethernet/Gigabit Ethernet Switch User’s Guide BOUT UIDE This User’s guide tells you how to install the DES-1210G, how to connect it to an Ethernet network, and how to set the configuration using the built-in console interface. Conventions For simplicity, this documentation uses the terms “Switch” (first letter upper case) to refer to the DES-1210G Ethernet Switch, and “switch”... -
Page 8: Introduction
DES-1210G Fast Ethernet/Gigabit Ethernet Switch User’s Guide NTRODUCTION This section describes the features of the Switch, as well as giving some background information about Fast Ethernet, Gigabit Ethernet, and switching technology. Fast Ethernet Technology The growing importance of LANs and the increasing complexity of desktop computing applications are fueling the need for high performance networks. -
Page 9: Switching Technology
DES-1210G 10/100/1000 Mbps Stand-alone Switch General Description of Switch The DES-1210G Switch module is equipped with eight ports providing dedicated 10 or 100 Mbps bandwidth. These ports can be used for connecting PCs, servers, and hubs. The eight dual speed ports use standard twisted pair cabling and are ideal for segmenting networks into small, connected subnets. -
Page 10: Performance Features
DES-1210G Fast Ethernet/Gigabit Ethernet Switch User’s Guide Performance features ♦ 1000BASE-SX Gigabit Ethernet ports ♦ IEEE 802.3 compliant ♦ IEEE802.3u compliant ♦ IEEE802.3z compliant ♦ IEEE802.1p Priority Queues ♦ IEEE802.3x flow control in full duplex mode ♦ Full and half-duplex for both 10Mbps and 100Mbps connections. The 1000BASE-SX Gigabit Ethernet module operates at full-duplex only. -
Page 11: Unpacking And Setup
♦ This User’s Guide CD-ROM ♦ Four rubber feet with adhesive backing ♦ RS-232 Console Cable If any item is found missing or damaged, please contact your local D-Link Reseller for replacement. Setup The site where you install the DES-1210G Switch may greatly affect its performance. Please follow these guidelines for setting up the switch. -
Page 12: Desktop Or Shelf Installation
Attach these cushioning feet on the bottom at each corner of the device. Allow enough ventilation space between the switch and any other objects in the vicinity. Figure 2-1 DES-1210G Switch installed on a Desktop or Shelf Rack Installation The Switch can be mounted in a standard 19”... -
Page 13: Power On
DES-1210G Fast Ethernet/Gigabit Ethernet Switch User’s Guide Figure 2-3 Mount Switch in Rack Power on Plug one end of the AC power cord into the power connector of the switch and the other end into the local power source outlet. -
Page 14: About This Guide
DES-1210G Fast Ethernet/Gigabit Ethernet Switch User’s Guide DENTIFYING XTERNAL OMPONENTS This chapter describes the front panel, rear panel, and LED indicators of the DES- 1210G. Front Panel The front panel of the Switch consists of LED indicators for power and for each port, an RS-232 communication port, eight 10/100 Mbps twisted-pair ports and two 1000BASE- SX fiber optic ports. -
Page 15: Rear Panel
DES-1210G Fast Ethernet/Gigabit Ethernet Switch User’s Guide Rear Panel The rear panel contains the AC power connector. The AC power connector is a standard three- pronged connector that supports the power cord. Plug-in the female connector of the provided power cord into this socket, and the male side of the cord into a power outlet. Supported input voltages range from 100 ~ 240 VAC at 50 ~ 60 Hz. -
Page 16: Connecting The Switch
(be sure to use Category 5 UTP or STP cabling for 100 Mbps Fast Ethernet connections). The end node should be connected to any of the eight ports (1x - 8x) of the DES-1210G. Port 1x is an uplink port if the MDI-X/MDI-II button is pushed in. An end node should not be connected to the uplink port unless using a crossover cable. -
Page 17: Switch To Hub Or Switch
DES-1210G Fast Ethernet/Gigabit Ethernet Switch User’s Guide Switch to Hub or Switch These connections can be accomplished in a number of ways. The most important consideration is that when using a normal, straight-through cable, the connection should be made between a normal crossed port (Port 1x, 2x, 3x, etc.) and an uplink (port 1x in MDI-II mode) port. -
Page 18: Connecting To Network Backbone Or Server
DES-1210G Fast Ethernet/Gigabit Ethernet Switch User’s Guide Connecting to Network Backbone or Server The 1000BASE-SX fiber optic ports 9 and 10 are ideal for uplinking to a network backbone or network server via 1000BASE-SX fiber optic cable. These ports operate at 1000 Mbps in full- duplex mode only. -
Page 19: Switch Management
Configuring the Switch is discussed in detail. Local Console Management Local console management involves the administration of the DES-1210G Switch via a direct connection to the RS-232 DCE console port. This is an Out-Of-Band connection, meaning that it is on a different circuit than normal network communications, and thus works even when the network is down. -
Page 20: User Interface
DES-1210G Fast Ethernet/Gigabit Ethernet Switch User’s Guide Figure 5-1. Management Console Screen Once you have connected to the console port on the switch, you should see a window like that pictured in Figure 5-1. If the screen appears but is blank, press “Control” and “R” (Ctrl+R) simultaneously to refresh the screen. -
Page 21: Software Features
DES-1210G Fast Ethernet/Gigabit Ethernet Switch User’s Guide Software Features The device provides the ability to configure the port speed, flow control, link aggregation, port monitor, 802.1p priority queues, and VLAN group. Port Speed You can select the desired Speed and Duplex for each port. Possible settings include: Auto, 10F, 10H, 100F, 100H and 1000F for the two 1000BASE-SX ports, where the number 10, 100, or 1000 is the speed in Mbps, and the H or F designates half-duplex or full-duplex. -
Page 22: Vlan Group
DES-1210G Fast Ethernet/Gigabit Ethernet Switch User’s Guide Figure 5-2 Example of Priority Queue Assignments VLAN Group Up to 9 port-based virtual LAN (VLAN) groups can be designated for the switch. Individual ports can exist in two or more VLANs simultaneously, so VLAN groups can overlap or intersect. For a more detailed discussion of VLANs , see Chapter 6. -
Page 23: Management Concepts
Port trunk groups are used to combine a number of ports together to make a single high- bandwidth data pipeline. The DES-1210G supports 3 trunk groups, which may include from 2 to 4 switch ports in Trunk Group 1. With 4 ports in this group a potential bit rate of 800 Mbps can be achieved. -
Page 24: Ieee 802.1P Priority
The DES-1210G gives you the ability to further tailor how priority tagged data packets are handled on your network. Using queues to manage priority tagged data allows you to specify its relative priority to suit the needs of your network. -
Page 25: Port-Based Vlans
DES-1210G Fast Ethernet/Gigabit Ethernet Switch User’s Guide Port-based VLANs The DES-1210G supports up to 9 port-based VLANs. Port-based VLANs limit traffic that flows into and out of switch ports. Thus, all devices connected to a port are members of the VLAN(s) the port belongs to, whether there is a single computer directly connected to a switch, or an entire department. -
Page 26: Technical Specifications
DES-1210G Fast Ethernet/Gigabit Ethernet Switch User’s Guide ECHNICAL PECIFICATIONS General Standards: IEEE 802.3 10BASE-T Ethernet IEEE 802.3u 100BASE-TX Fast Ethernet IEEE 802.3z 1000BASE-SX Gigabit Ethernet IEEE 802.3x Flow Control ANSI/IEEE Std 802.3 NWay auto-negotiation Protocol: CSMA/CD Data Transfer Rate: Ethernet:... - Page 27 DES-1210G Fast Ethernet/Gigabit Ethernet Switch User’s Guide Physical and Environmental Weight: 2.65 Kg EMI: CE Class A, C-Tick Class A, FCC Class A, VCCI Class A, BSMI class A Safety: UL/CUL, TUV/GS Performance Transmission Method: Store-and-forward RAM Buffer: 6 Mb bytes per device...
-
Page 28: Cables And Connectors
DES-1210G Fast Ethernet/Gigabit Ethernet Switch User’s Guide ABLES AND ONNECTORS When connecting the Switch to another switch, a bridge or hub, a crossover cable is necessary. Please review these products for matching cable pin assignment. The following diagrams and tables show the standard RJ-45 receptacle/connector and their pin assignments. - Page 29 DES-1210G Fast Ethernet/Gigabit Ethernet Switch User’s Guide RJ-45 Pin Assignments Contact MDI-X Port MDI-II Port RD+ (receive) TD+ (transmit) RD- (receive) TD- (transmit) TD+ (transmit) RD+ (receive) Not used Not used Not used Not used TD- (transmit) RD- (receive) Not used...
- Page 30 DES-1210G Fast Ethernet/Gigabit Ethernet Switch User’s Guide 1000 BASE-SX Fiber Optic Cable –Maximum Lengths Use the following table to as a guide for the maximum lengths for 1000BASE-SX cable. MHz/km Maximum Media Type Standard Rating Distance 50/125µm 500 Meters 1000BASE-SX Multimode Fiber 50/125µm...
- Page 32 Unit 2, Parkside 86 Oak Avenue Highveld Technopark Centurion, Gauteng, Republic of South Africa TEL: 27(0)126652165 FAX: 27(0)126652186 CELL NO: 0826010806 (Bertus Moller) CELL NO: 0826060013 (Attie Pienaar) E-MAIL: bertus@d-link.co.za, attie@d-link.co.za SWEDEN D-LINK SWEDEN P.O. Box 15036, S-167 15 Bromma Sweden TEL: 46-(0)8564-61900 FAX: 46-(0)8564-61901 E-MAIL: info@dlink.se...
- Page 33 U.K. D-LINK EUROPE D-Link House, 6 Garland Road, Stanmore, London HA7 1DP U.K. TEL: 44-20-8235-5555 FAX: 44-20-8235-5500 BBS: 44-20-8235-5511 URL: www.dlink.co.uk E-MAIL: info@dlink.co.uk U.S.A D-LINK U.S.A. 53 Discovery Drive, Irvine, CA 92618 USA TEL: 1-949-788-0805 FAX: 1-949-753-7033 INFO LINE: 1-800-326-1688 BBS: 1-949-455-1779, 1-949-455-9616 URL: www.dlink.com E-MAIL: tech@dlink.com, support@dlink.com...
-
Page 34: Registration Card
3. What network protocol(s) does your organization use ? !XNS/IPX !TCP/IP !DECnet !Others_______________________________________________________ 4. What network operating system(s) does your organization use ? !D-Link LANsmart !Novell NetWare !NetWare Lite !SCO Unix/Xenix !PC NFS !3Com 3+Open !Banyan Vines !DECnet Pathwork !Windows NT !Windows NTAS !Windows '95 !Others________________________________________________________________________________ 5.