D-Link DES-1228/ME Reference Manual page 315

enable igmp_snooping multicast_vlan
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To enable an IGMP snoop multicast VLAN:
DES-1228/ME:5# enable igmp_snooping multicast_vlan
Command: enable igmp_snooping multicast_vlan
Success.
DES-1228/ME:5#
disable igmp_snooping multicast_vlan
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To enable IGMP snoop multicast VLAN:
DES-1228/ME:5# disable igmp_snooping multicast_vlan
Command: disable igmp_snooping multicast_vlan
Success.
DES-1228/ME:5#
show igmp_snooping multicast_vlan
Purpose
Syntax
Description
Parameters
Restrictions
DES-1228/ME Metro Ethernet Managed Switch CLI Reference Guide
Used to enable the multicast VLAN function.
enable igmp_snooping multicast_vlan
This command is used to control the multicast VLAN function. The
ISM VLAN will take effect when IGMP snooping multicast VLAN is
enabled. By default, the multicast VLAN is in a disabled state.
None.
Only Administrator level, Operator level or Power User level users
can issue this command.
Used to disable the multicast VLAN function.
disable igmp_snooping multicast_vlan
This command is used to disable the multicast VLAN function. By
default, the multicast VLAN is in a disabled state.
None.
Only Administrator level, Operator level or Power User level users
can issue this command.
Used to view multicast VLAN information.
show igmp_snooping multicast_vlan {<vlan_name 32>}
This command is used to display multicast VLAN information.
<vlan_name 32> − The name of the multicast VLAN to be shown.
If no parameters are specified, the system will display all
multicast VLANs on the Switch.
None.
311