D-Link DES-1228/ME Reference Manual page 54

create snmp user
Restrictions
Example usage:
To create an SNMP user on the Switch:
DES-1228/ME:5#create snmp user dlinkuser dlink encrypted by_password auth
md5 knickerbockers priv none
Command: create snmp user dlinkuser dlink encrypted by_password auth md5
knickerbockers priv none
Success.
DES-1228/ME:5#
delete snmp user
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To delete a previously entered SNMP user on the Switch:
DES-1228/ME:5#delete snmp user dlinkuser
Command: delete snmp user dlinkuser
Success.
DES-1228/ME:5#
DES-1228/ME Metro Ethernet Managed Switch CLI Reference Guide
form, that will be used to encrypt the contents of messages the host sends to the agent.
none – Adding this parameter will add no encryption.
Only Administrator level, Operator level or Power User level users can issue this
command.
Used to remove an SNMP user from an SNMP group and also to
delete the associated SNMP group.
delete snmp user <SNMP_name 32>
This command is used to remove an SNMP user from its SNMP
group and then delete the associated SNMP group.
<SNMP_name 32> − An alphanumeric string of up to 32 characters
that identifies the SNMP user that will be deleted.
Only Administrator level users can issue this command.
50