Kyocera KM-C2525E Service Manual page 82

2JL/2JJ/2JG/2JD-1
Maintenance
item No.
Setting: Transfer belt cleaning voltage in printing monochrome mode (This setting is displayed by
U107
40/35 ppm model only)
1. Change the value using the cursor up/down keys.
Display
Width<160
160<=Width<220
220<=Width
2. Press the start key. The value is set.
Supplement
While this maintenance item is being executed, copying from an original is available in the interrupt copying
mode.
Completion
Press the stop/clear key. The screen for selecting a maintenance item No. is displayed.
Setting separation shift bias
U108
Description
Adjusts output of separation shift bias and ON/OFF timing.
Purpose
To set when the separated malfunction of the paper occurs.
Start
1. Press the start key.
2. Select the item to be set. The screen for executing each item is displayed.
Display
Set Output Value
Set Timing
Setting: [Set Output Value]
1. Change the setting value using the cursor up/down key.
Display
Light Full 1st
Light Full 2nd
Normal Full 1st
Normal Full 2nd
Normal Lead edge
Heavy/OHP
2. Press the start key. The value is set.
1-3-42
Description
Description
Small sizes (under 160 mm wide)
Medium sizes (160 to under 220 mm wide)
Large sizes (more than 220mm wide)
Description
The paper of the paper thick or the separation shift bias output adjust-
ment with type
ON/OFF timing adjustment with paper position
Description
Separation shift bias for the first side on
paper with thickness 60 g/m
Separation shift bias for the second side on
paper with thickness 60 g/m
Separation shift bias for the first side on
paper with thickness 60 g/m
Separation shift bias for the second side on
paper with thickness 60 g/m
Separation shift bias for the leading edge on
paper with thickness 60 g/m
Separation shift bias for transparencies with
thickness 105 g/m to 220 g/m
2
Setting
range
0 to 255
0 to 255
0 to 255
Setting
range
0 to 255
to 64 g/m
2 2
0 to 255
to 64 g/m
2 2
0 to 255
to 105 g/m
2 2
0 to 255
to 105 g/m
2 2
-127 to 127
to 105 g/m
2 2
0 to 255
2
Default
setting
85
85
85
Default
setting
85
60
52
60
8
26