Kyocera KM-C2525E Service Manual page 117

Maintenance
item No.
Adjusting margins for scanning an original on the contact glass
U403
Description
Adjusts margins for scanning the original on the contact glass.
Purpose
Make the adjustment if margins are incorrect.
Adjustment
1. Press the start key.
2. Select the item.
Display
A MARGIN
B MARGIN
C MARGIN
D MARGIN
3. Press the interrupt key.
4. Place an original and press the start key to make a test copy.
5. Change the setting value using the cursor up/down keys.
Increasing the value makes the margin wider, and decreasing it makes the margin narrower.
6. Press the start key. The value is set.
Caution
Check the copy image after the adjustment. If the image is still incorrect, perform the following adjustments in
maintenance mode.
U403
Completion
Press the stop/clear key. The indication for selecting a maintenance item No. appears.
Description
Scanner left margin
Scanner leading edge margin
Scanner right margin
Scanner trailing edge margin
Ejection direction
(reference)
Scanner
left margin
(2.0±1.0mm)
U404
(P.1-3-78)
Description
Setting Initial
range setting
0 to 10.0 2.0
0 to 10.0 2.0
0 to 10.0 2.0
0 to 10.0 2.0
Scanner leading edge margin
(3.5±0.5mm)
Scanner trailing edge margin
(2.0±1.0mm)
Figure 1-3-20
2JL/2JJ/2JG/2JD-1
Change in value per step
0.5 mm
0.5 mm
0.5 mm
0.5 mm
Scanner
right margin
(2.0±1.0mm)
1-3-77