Kyocera KM-C2525E Service Manual page 57

Maintenance
item No.
Adjusting the deflection in the paper
U051
Description
Adjusts the deflection in the paper at the registration roller.
Purpose
Make the adjustment if the leading edge of the copy image is missing or varies randomly, or if the copy paper
is Z-folded.
Method
1. Press the start key.
2. Select the item to be adjusted.
Display
Set Paper Loop Amount
Set Paper Loop Amount BW*
*: Displayed by 40/35 ppm model only
Adjustment
1. Select the item.
When [Set Paper Loop Amount] is selected
Display
MPT (Large)
MPT (Small)
MPT Half (Large)
MPT Half (Small)
Cassette (Large)
Cassette (Small)
Duplex (Large)
Duplex (Small)
Large size: 218 mm or more in width of paper.
When [Set Paper Loop Amount BW] is selected (This setting is displayed by 40/35 ppm model only)
Display
MPT (Large) BW
MPT (Small) BW
Cassette (L) BW
Cassette (S) BW
Large size: 218 mm or more in width of paper.
2. Press the interrupt key.
3. Place an original and press the start key to make a test copy.
4. Change the setting value using the cursor up/down keys.
For output example 1, increase the value. For output example 2, decrease the value.
The greater the value, the larger the deflection; the smaller the value, the smaller the deflection.
5. Press the start key. The value is set.
Description
Description
Deflection adjustment
Deflection adjustment in monochrome mode
Description
Paper feed from MP tray
Paper feed from MP tray
Paper feed from MP tray
Paper feed from MP tray
Paper feed from cassette
Paper feed from cassette
Duplex mode (second)
Duplex mode (second)
Description
Paper feed from MP tray
Paper feed from MP tray
Paper feed from cassette
Paper feed from cassette
Original
example 1
Figure 1-3-3
Setting
range
-30 to 20
-30 to 20
-30 to 20
-30 to 20
-30 to 20
-30 to 20
-30 to 20
-30 to 20
Setting
range
-30 to 20
-30 to 20
-30 to 20
-30 to 20
Copy Copy
example 2
2JL/2JJ/2JG/2JD-1
Initial Change in
setting value per step
0 1 mm
0 1 mm
0 1 mm
0 1 mm
0 1 mm
0 1 mm
0 1 mm
0 1 mm
Initial Change in
setting value per step
0 1 mm
0 1 mm
0 1 mm
0 1 mm
1-3-17