Kyocera KM-C2525E Service Manual page 56

2JL/2JJ/2JG/2JD-1
Maintenance
item No.
Checking the operation of the fan motors
U037
Description
Drives the fan motors.
Description
To check the operation of the fan motors.
Method
1. Press the start key.
2. Select the item to operate. The selected item starts driving the fan motor.
Do not drive the paper conveying fan motors 1 to 4 for more than 10 s.
Display
ALL
Fixing Cooling Fan
Developing Cooling Fan1,2
LSU Rear Cooling Fan
Conveying Cooling Fan 1,2
Mid Transfer Cool Fan 1,2
Power Source Cooling Fan
Conveying Fan
Polygon Cool Fan*
*: Displayed by 40/35 ppm model only
3. To stop operation, an item is selected again or press the stop/clear key.
Completion
Press the stop/clear key when the motor stops. The screen for selecting a maintenance item No. is displayed.
1-3-16
Description
Operation
Fuser fan motor (FUFM), developing cooling fan motor 1/2/3
(DEVCFM1/23), rear cooling fan motor (RCFM), transfer fan
motor 1/2 (TRFM1/2), power source fan motor (PSFM), paper
conveying fan motor 1/2/3/4 (PCFM1/2/3/4) and polygon cooling
fan motor (PLFM)* are turned on.
Fuser fan motor (FUFM) is turned on.
Developing cooling fan motor 2/3 (DEVCFM2/3) are turned on.
Rear cooling fan motor (RCFM) and developing cooling fan motor
1 (DEVCFM1) are turned on.
Transfer fan motor 1 (TRFM1) is turned on.
Transfer fan motor 2 (TRFM2) is turned on.
Power source fan motor (PSFM) is turned on.
Paper conveying fan motor 1/2/3/4 (PCFM1/2/3/4) are turned on.
Polygon cooling fan motor (PLFM) is turned on.