Maintenance
item No.
Setting: Permit to execute at continuously 50 pages
U464
1. Select ON or OFF.
Display
ON
OFF
Initial setting: ON
2. Press the start key. The setting is set, and The screen for selecting a maintenance item No. is displayed.
Setting: Permit to operate (power-up/recovery from sleep mode)
1. Select ON or OFF.
Display
ON
OFF
Initial setting: ON
2. Press the start key. The setting is set, and The screen for selecting a maintenance item No. is displayed.
Setting: Permit to operate (B/W)
1. Select ON or OFF.
Display
ON
OFF
Initial setting: OFF
2. Press the start key. The setting is set, and The screen for selecting a maintenance item No. is displayed.
Setting: Permit to operate (toner feeding/toner near-end)
1. Select ON or OFF.
Display
ON
OFF
Initial setting: ON
2. Press the start key. The setting is set, and The screen for selecting a maintenance item No. is displayed.
Setting: Custom settings
1. Select ON or OFF.
Display
ON
OFF
Initial setting: OFF
2. Press the start key. The setting is set, and The screen for selecting a maintenance item No. is displayed.
Completion
Press stop/clear key. The screen for selecting a maintenance item No. is displayed.
Description
Description
Enables permission to execute at continuously 50 pages
Disables permission to execute at continuously 50 pages
Description
Executes ID correction if fuser temperature is less than 50
at power-up or recovery from auto sleep mode
Executes ID correction regardless of fuser temperature at power-up
or recovery from auto sleep mode
Description
Executes ID correction in monochrome mode
Does not execute ID correction in monochrome mode
Description
Executes ID correction when toner is added or running out
Does not execute ID correction when toner is added or running out
Description
Enables custom settings in setting the calibration cycle under the
machine defaults
Disables custom settings in setting the calibration cycle under the
machine defaults
2JL/2JJ/2JG/2JD-1
°
°
C/122
F
1-3-85