Kyocera KM-C2525E Service Manual page 252

2JL/2JJ/2JG/2JD
13. Remove two screws and springs holding the
laser scanner unit.
14. Remove the MP unit (see page 1-5-4).
15. Remove one screw and then remove the
interface rear cover.
16. Remove the connector of the LSU wire and
release the wire from the wire saddles.
1-5-20
Spring
Screw
Figure 1-5-40
Interface rear cover
Figure 1-5-41
Wire
saddles
Figure 1-5-42
Spring
Screw
LSU wire