Kyocera KM-C2525E Service Manual page 132

2JL/2JJ/2JG/2JD-1
Maintenance
item No.
Setting the time out
U506
Description
Sets the communication timeout time for connection to a computer.
Purpose
To change the preset value if a communication error occurs after connection to a computer continues for a
long time. By delaying the error detection timing, the error may be cleared. If the error is not cleared after the
preset value is changed, however, return the preset value to the initial value.
Setting
1. Press the start key.
2. Change the value using the cursor up/down keys.
Description
Timeout time
The setting can be changed by 10 s per step.
3. Press the start key. The setting is set, and the screen for selecting a maintenance item No. is displayed.
Completion
Press the stop/clear key. The screen for selecting a maintenance item No. is displayed.
Setting the LDAP
U508
Description
Enables or disables an LDAP server.
Purpose
To change the setting to ON when use of an LDAP server is requested.
Setting
1. Press the start key.
2. Select ON or OFF.
Display
ON
OFF
Initial setting: OFF
3. Press the start key. The setting is set, and the screen for selecting a maintenance item No. is displayed.
Completion
Press the stop/clear key. The screen for selecting a maintenance item No. is displayed.
Setting the enterprise mode
U510
Description
Sets whether or not the enterprise mode setting is enabled.
This maintenance mode is effective for only 120 V specifications.
Purpose
According to user request, changes the setting.
Supplement
It is not possible to turn setting simultaneously with U511 (Setting scan To FTP) to ON.
Setting
1. Press the start key.
2. Select ON or OFF.
Display
ON
OFF
Initial setting: OFF
3. Press the start key. The setting is set.
Completion
Turn the main power switch off.
1-3-92
Description
Setting range
10 to 120 (s)
Description
LDAP server is enabled.
LDAP server is disabled.
Description
Enterprise mode setting is enabled.
Enterprise mode setting is disabled.
Initial setting
10