Kyocera KM-C2525E Service Manual page 80

2JL/2JJ/2JG/2JD-1
Maintenance
item No.
Setting: [Normal2/3(F)Back BW] (This setting is displayed by 40/35 ppm model only)
U106
1. Change the value using the cursor up/down keys.
Display
Width<160
160<=Width<220
220<=Width
2. Press the start key. The value is set.
Setting: [Heavy 1 - 3]
1. Change the value using the cursor up/down keys.
Display
Width<160
160<=Width<220
220<=Width
2. Press the start key. The value is set.
Setting: [OHP]
1. Change the value using the cursor up/down keys.
Display
Width<220
220<=Width
2. Press the start key. The value is set.
Setting: [Bias]
1. Change the value using the cursor up/down keys.
Display
Reverse (Full)
Reverse (Half)
Cleaning (Full)
Cleaning (Half)
Cleaning (BW)*
*: Displayed by 40/35 ppm model only
2. Press the start key. The value is set.
Supplement
While this maintenance item is being executed, copying from an original is available in the interrupt copying
mode.
Completion
Press the stop/clear key. The screen for selecting a maintenance item No. is displayed.
1-3-40
Description
Description
Small sizes (under 160 mm wide)
Medium sizes (more than 160 to under 220 mm
wide)
Large sizes (more than 220mm wide)
Description
Small sizes (under 160 mm wide)
Medium sizes (more than 160 to
under 220 mm wide)
Large sizes (more than 220mm wide) 0 to 255
Description
Small and medium sizes (under 220
mm wide)
Large sizes (more than 220mm wide) 0 to 255
Description
Transfer bias when plain paper is used
Transfer bias when thick paper is used
Cleaning control value when plain paper is used 0 to 255
Cleaning control value when thick paper is used 0 to 255
Cleaning control value in monochrome mode
Setting
range
0 to 255
0 to 255
0 to 255
Default setting
Setting
25/25,32/25,
range
32/32 ppm
0 to 255 117
0 to 255 71
71
Default setting
Setting
25/25,32/25,
range
32/32 ppm
0 to 255 155
58
Setting
range
0 to 255
0 to 255
0 to 255
Default
setting
148
128
87
40/35 ppm
117
80
55
40/35 ppm
107
47
Default
setting
189
189
34
34
34