Kyocera KM-C2525E Service Manual page 55

Maintenance
item No.
U034 4. Change the setting value using the cursor up/down keys.
For output example 1, increase the value. For output example 2, decrease the value.
5. Press the start key. The value is set.
Caution
Check the copy image after the adjustment. If the image is still incorrect, perform the following adjustments in
maintenance mode.
U034
Completion
Press the stop/clear key. The screen for selecting a maintenance item No. is displayed.
Setting the printing area for folio paper
U035
Description
Changes the printing area for copying on folio paper.
Purpose
To prevent cropped images on the trailing edge or left/right side of copy paper by setting the actual printing
area for folio paper.
Setting
1. Press the start key.
2. Select the item to be set.
3. Change the setting value using the cursor up/down keys.
Display
LENGTH DATA
WIDTH DATA
4. Press the start key. The value is set.
Completion
Press the stop/clear key. The screen for selecting a maintenance item No. is displayed.
Center line of printing
Correct image
U067 U072
(P.1-3-24) (P.1-3-28)
Setting
Length
Width
Description
Output Output
example 1 example 2
Figure 1-3-2
Setting range
330 to 356 (mm)
200 to 220 (mm)
2JL/2JJ/2JG/2JD-1
Default setting
330
210
1-3-15