Kyocera KM-C2525E Service Manual page 165

(8) Setting MP tray
Specifying the paper size to the MP tray
Auto detect
The paper size is automatically detected.
1. Press [Auto Detection].
2. Select [Centimeter] ([Centimetre]) or [Inch].
Other standard sizes
Specify special standard sizes.
1. Press [Others Standard] and press [Select size].
2. Select the paper size.
3. Press [Close].
Input size
Specify the required paper size.
1. Press [Input size].
2. Press [+] and [-] to set the [Y] (height) size.
Metric models only
Enter the size directly using the numeric keys by
pressing [#-Keys].
Setting range
Inch models: 3
7/8
Metric models: 98 - 297 mm (1 mm increments)
3. Press [+] and [-] to set the [X] (width) size.
Metric models only
Enter the size directly using the numeric keys by
pressing [#-Keys].
Setting range
Inch models: 5
7/8
Metric models: 148 - 432 mm (1 mm increments)
Custom size
Store frequently used paper sizes (1 - 4) as custom sizes.
1. Press [Others Standard] and press [Select size].
2. Select the paper size from [Custom Size] ([Use reg-
ist]).
Specifying the paper type to the MP tray
1. Press [Select Paper Type].
2. Select the paper type.
Plain/Transparency/Rough/Vellum/Labels/Recy-
cled/Preprinted/Bond/Cardstock/Color (Colour) /
Prepunched/Letterhead/Thick paper/Envelope/
Coated/High Quality/Custom 1 - 8
3. Press [Close].
- 11 " (1/8" increments)
5/8
- 17" (1/8" increments)
(9) Registering non-standard sizes for originals
Pre-register 4 types of non-standard original sizes.
1. Select the number to register from [Original Size
(custom 1 - 4)] and press [Change #].
2. Press [Set].
3. Press [+] or [-] to set the Y (height) size.
Setting range
Inch models: 2 - 11
Metric models: 50 - 297 mm (1 mm increments)
4. Press [+] or [-] to set the Y (height) size.
Setting range
Inch models: 2 - 17" (1/8" increments)
Metric models: 50 - 432 mm (1 mm increments)
5. Press [Close]
2JL/2JJ/2JG/2JD-1
" (1/8" increments)
5/8
1-3-125