Kyocera KM-C2525E Service Manual page 277

(2) MP tray paper feed section
Pressing the Start key activates the MP solenoid (MPSOL) to release the paper stopper, which in turn causes the MP for-
warding pulley mounted on the MP support to descend. In turn, the MP forwarding pulley comes in contact with the paper
placed on the MP tray is fed forward as the MP forward pulley rotates and forwarded to the MP feed pulley and the MP
separation pulley. Also during paper feed, the MP separation pulley prevents multiple sheets from being fed at one time by
the torque limiter.
(1) MPT lower guide
(2) Middle roller
(3) Bypass friction plate
(4) MP separate pulley
(5) Separate pulley holder
(6) MP forwarding pulley
(7) MPT LF holder
(8) MP feed pulley
(9) MPT base
MPF SOL1 DR
YC24-B5
MPF SOL2 DR
YC24-B6
MPF CLT REM
YC24-B8
MPF PPR SET
YC24-A11
EPWB
MPPFSW
MPF JAM1
YC24-B2
MPF FED CLT REM
YC24-B10
DLP COL MOT DR
YC26-13
DLP COL MOT CLK
YC26-15
DLP COL MOT DIR
YC26-16
DLP COL MOT RDY
YC26-14
MPF_WIDTH3
MPF_WIDTH2
YC24-A2
YC24-A3
MPF_WIDTH1
YC24-A4
MPF TABLE
YC24-A6
MPF LENGTH
YC24-A8
Figure 2-1-3 MP tray paper feed section (1)
MPPSSW
MPPFCL
MPPCCL
MPM
Figure 2-1-4 MP tray paper feed section block diagram (1)
(10) MIddle pulley
(11) MP paper feed switch (MPPFSW)
(12) Bypass table A
(13) Bypass table B
(14) Bypass table C
(15) Slider
(16) MP paper length size switch (MPPLSW)
(17) Paper stopper
MPSOL
MPPWSW
2JL/2JJ/2JG/2JD
MP tray
MPPLSW
MPTSW
2-1-3